Kramer Firewire Extenders PAIR TP-300-FW TP300FW

Description

PAIR of Kramer TP-300FW FireWire to Twisted Pair Transmitter/Receiver Range Extenders
Never used, although I took them out of the box to look at them. You need at least two to make it work, one at each end, so I'm bundling two in one listing. This setup allows you to extend a firewire signal 300 feet (100 meters) using CAT5 cable. If you interconnect a THIRD one, you can transmit a firewire signal twice that far (600 feet or 200 meters).
Manuals, power supplies, and mounting brackets all included.
If you're outside the USA (including Canada), shipping is done through the eBay Global Shipping Program, so be aware of the cost of that service before buying.
The
TP-300W FireWire to Twisted Pair Transmitter/Receiver Range Extender
from
Comprehensive / Kramer
allows you to extend the range of your FireWire devices using CAT5 networking cable. The device takes a FireWire signal and converts it to a signal that can be transmitted over CAT5. A second unit is needed to convert the incoming signal back into a FireWire one at the other end of the chain, so you'll need at least 2 of these devices to extend the range of your FireWire signal.
Extend FireWire Range
You'll be able to extend your FireWire range by up to 320' (100 m) using a pair of extenders. You can even add a 3rd extender, allowing you to go for up to 640' (200 m) between your FireWire device and computer.
Spark-Guard Protection
The extender includes Spark-Guard circuitry to protect your FireWire device and computer against electric charges that can damage them. This not only allows you to extend your range, but also protects your equipment at the same time.