Berghof High Pressure Reactor System

Description

BRAND: BERGHOF | Heidolph
System Models: highpreactor
™
| BTC-3000 | BLH-800 (a.k.a. Heidolph MR
Hei-Standard
)
MPN: BR-100 | BTC-3000 #5729000 | BLH-800 Berghof #5390030 (Heidolph #505-20000-01)
ITEM DESCRIPTION: Completely integrated high pressure reactor system, consisting of a Berghof 190 ml BR-100 high pressure reactor assembly, Berghof BTC-3000 temperature controller and data logger, and an integrated Berghof BLH-800 (Heidolph) heater platen with stirring capability.
CONDITION: USED
CONDITION DESCRIPTION: Brand New condition, used for 1-2 pressure reactions only.
ITEM SPECIFICS:
SERIAL #:
6a)
Berghof BR-100 Reactor—S/N 165/B.1.2012
|
7a)
Berghof BLH-800— S/N 060705401
|
7b)
Berghof BTC-3000—S/N 000446
FEATURES: The BR-100 reactor is designed to operate up to 200 bar and 300 ºC, and is OEM safety tested to 350 bar. Temperature controls, pressure read out, and temperature read out are integrated feedback controlled, and data logger compatible
COUNTRY OF MFR: Germany
SYSTEM CHARACTERISTICS: This is a complete Berghof reactor system consisting of—
1a)
Main BR-100 reactor vessel equipped with analog and digital pressure read out, gas feeds, reactor vessel contents extractor, K-Type thermal couple sensor, and reactor vessel body heat transfer block |
2)
BTC-3000 controller and data logger |
4a)
BLH-800 heating platen with stirring control. Complete German/English user manuals available for all reactor system components
DETAILS:
1a)
Main BR-100 Reactor Assembly—Completely PTFE shielded from reactor vessel contents—
1b)
Analog and Digital pressure gauge/sensor and vessel contents extractor valve |
1c)
Reactor body heat transfer block |
5)
Stainless steel pressure vessel with PTFE vessel liner and PTFE seal ring |
6a)
Reactor lid with sealed thermal couple insert tube |
6b)
K-Type thermal couple in position |
2)
BTC-3000 Controller—
3a)
K-Thermocouple temperature signal input |
3b)
Pressure transducer signal input |
3c)
BLH-800 stir rate control output |
3d)
RS-232 data logger output signal |
3e)
On/Off electrical control to the BLH-800 heater platen |
1d)
BLH-800—
4a)
Manual temperature and stir rate control panel |
4b)
On/Off heater platen control hook up line from BTC-3000 controller |
4c)
BLH-800 stirring rate control line from BTC-3000 Controller